Need help?Do you have a question about the Astrodesign VG-876 and is the answer not in the manual?
General| Outputs | HDMI |
|---|---|
| Video Output | HD-SDI, SD-SDI, HDMI |
| Storage Media | Not applicable |
| Max Recording Time | Not applicable |
| Power Supply | AC 100 V to 240 V, 50/60 Hz |
General introduction to the instruction manual and its purpose.
Explains shorter descriptions used for terms within the manual for conciseness.
Details the relationship between specific interface units and compatible VG Series products.
Details common setting items and their values applicable to all interface units.
Describes the functions and settings for analog output units.
Details the configurable settings for analog output.
Explains TV standard signal functions like Macrovision and color striping.
Describes the functions and settings for HDMI interface units.
Details the internal HDMI output section, including compatible formats.
Provides connector types and pin assignments for HDMI Type A.
Explains the data transfer methods for HDMI output based on dot clock modes.
Lists and describes various output settings for HDMI units.
Illustrates dot clock limitations based on pattern rendering bit length and dot clock modes.
Covers the functions and settings for DisplayPort interface units.
Details the connector type and pin assignment for DisplayPort.
Explains data transfer methods for DisplayPort based on dot clock and split modes.
Lists and describes output settings specific to DisplayPort units.
Details configuration settings for DisplayPort units, including audio and MST functions.
Covers settings for DisplayPort analysis, including link training and pattern testing.
Explains how to display DisplayPort interface settings as patterns.
Illustrates dot clock limitations based on pattern rendering bit length for DisplayPort.
Describes the functions and settings for SDI interface units.
Explains data transfer methods for SDI signals, including Dual Link and 4K formats.
Lists and describes output settings for SDI units, including format, width, and split modes.
Details payload identification data settings for SDI units.
Covers configuration settings for SDI units, including time code and clock delay.
Describes the functions and settings for V-by-One HS interface units.
Details the connector type and pin assignment for V-by-One HS.
Explains data transfer methods for V-by-One HS based on lane count and resolution.
Lists and describes output settings for V-by-One HS units, including split and pre-emphasis.
Illustrates dot clock limitations based on pattern rendering bit length for V-by-One HS.
Describes the functions and settings for iTMDS interface units.
Details the connector type and pin assignment for iTMDS.
Explains data transfer methods for iTMDS in DVI mode.
Lists and describes output settings for iTMDS units, including mode and split options.
Illustrates dot clock limitations based on pattern rendering bit length for iTMDS.
Covers synchronization features for multiple units
Details the output parts and specifications of the VM-1876-MX synchronization unit.
Explains how to synchronize multiple units for higher resolution output.
Shows connection diagrams for VG units and VM-1876-MX synchronization.
Illustrates screen splitting methods when synchronizing four VG units.
Illustrates screen splitting methods when synchronizing two VG units.
Shows examples of scanning direction settings in Reverse Mode for VG units.
Details setting parameters for the VM-1876-MX synchronization unit.
Explains arbitrary program data setting methods for VG master and remote box output.
Details the maximum current consumption of the DDC power supply for different outputs.
Lists trademarks and registered trademarks mentioned in the manual.
To Next Page
