ATAGO PRM-100a User Manual

25
From Brix
SCALE
key
SET UP
SCALE
key
SCALE
key
SCALE
key
SCALE
key
SCALE
key
Conc1
Conc2
Conc3
Conc4
Conc5
⇒
↓
⇒
↓
⇒
↓
⇒
↓
⇒
↓
⇒
18.87
LLLLLL
----
5.3
1.33299
↓ ENTER
key
↓ ENTER
key
↓ ENTER
key
↓ ENTER
key
↓ ENTER
key
The "Conc" light illuminated.
↓
Press START/STOP key to measurement.
(5) Confirmation of Measurement Values at Each Mode
This operation is for confirming measurement values at each mode when or after concentration scale
(Conc1 to 5) is set.
①Press START/STOP to stop measurement.
②"StoP" will be displayed on the measurement value
display.
③Press SCALE key once and the last value will be
displayed.
④Press SCALE again to display results in the next
measurement mode, (i.e. nD, Brix, Conc1 to 5, in
turn).
Pressing SCALE while Conc5 is displayed will bring
up "SET UP" mode.
⑤ "StoP" will be displayed if left inactive for 10
seconds.

ATAGO PRM-100a Specifications

General

Brand	ATAGO
Model	PRM-100a
Category	Measuring Instruments
Language	English