ATAGO PRM-100a - Available Parts and Accessories; Customer-Serviceable Parts List

50
15. Availability of Parts
The table below lists the customer-serviceable and expendable parts for this unit.
For their availability, contact your ATAGO distributor.
Part name
Part number
Summary
RS-232C output cable
RE-65301
4-pin connector, D-Sub connector on one end, standard 10mm.
Alarm output cable
RE-65305
6-pin connector, crimp terminal on one end, standard 10mm.
O-ring (Silicon)
RE-68100
O-ring attached between the detection section and sample inlet unit.
O-ring (EPDM)
RE-68115
O-ring (Viton)
RE-68002