38
(4-4) Preparing a PC for Data Transmission
Download a terminal emulator for PC serial communication.
Here, the open-source software “Tera Tarm” is used as an example.
※When the PC does not have a 9-pin D-sub connector, purchase a USB/serial adapter.
RE-55202 : USB serial conversion adapter
Download Tera Term from a website, such as the one below:
http://ttssh2.sourceforge.jp/index.html.en/
① Start Tera Term.
Select "Serial" on the New connection dialogbox.
Select the port number.
Click OK.
※ Check the port number.
"Control Panel" → "System and Security" → "Device Manager" → "Port"
② Click Setup, and then Serial port.