EasyManuals Logo

ATCOM IPPBX IP08 Product Guide

Default Icon
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
www.atcom.cn 10
2.3 Access by Browser with Fallback IP Address
This way only be supported by the latest version (IP08-0.3.6) of IP08. If you forget the IP Address
of IP08 you have set up, you can use the fallback IP Address: 172.31.255.254/30. Before logging
into IP08, please set up the IP Address of your PC: 172.31.255.253 and SubMask:
255.255.255.252. At last, you can open your browser and enter:172.31.255.254 to log into the web
page of IP08.
2.4 Console Port Access to IP08
If you do not have network connection between IP08 and PC, you can try to access to IP08 by
console port. Please try to do as the following steps:
1. Please connect the console port of IP08 to your PC’s console port with RS232 console cable,
you can refer to the following illustration:
2. Please run your Hyper Terminal, and set up the console port like the following:
Bits per second: 115200
Data bits : 8
Parity: None
Stop bits: 1
Flow control: None

Table of Contents

Other manuals for ATCOM IPPBX IP08

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ATCOM IPPBX IP08 and is the answer not in the manual?

ATCOM IPPBX IP08 Specifications

General IconGeneral
BrandATCOM
ModelIPPBX IP08
CategoryPBX
LanguageEnglish