ATCOM IPPBX IP08 Product Guide

www.atcom.cn 12
Chapter 3 Configure IP08 by Web GUI
3.1 System Status
In the system status screen, it displays the functions you configured, such as: trunks, extensions,
conference and so on like the following screen:
3.2 Configure Hardware
In the configure hardware page, it includes the following components: analog hardware, tone
region, advanced settings.
Analog Hardware
When you boot the IP08, which will detect the FXO and FXS modules automatically, the analog
hardware component displays the modules which are detected correctly.
Tone Region
You should select the tone region according to your country, if it does not have your country’s
name in the dropdown list, please ask your service operator which kind of tone region is used in
your area.
3.3 Trunks
To receive calls from PSTN and make calls to the outside world, you have to use trunk. Please
select the Trunks option from the vertical menu on the left of the main page, then you can get the
following screen:

ATCOM IPPBX IP08 Specifications

General

Brand	ATCOM
Model	IPPBX IP08
Category	PBX
Language	English