ATCOM IPPBX IP08 Product Guide

www.atcom.cn 24
3.11 Incoming Calling Rules
This is where the behavior of incoming calls from all trunks is being handled. When an incoming
call from PSTN or VoIP trunk is received, asterisk needs to know where to direct it. It can be
directed to a ring group, an extension, digital receptionist, voice menu or queue. For this purpose,
Incoming Calling Rules need to be set up.
Please select the Incoming Calling Rules option from the vertical menu on the left of the main
page, then you can get the following screen:
Click on New Incoming Rule button on the illustration above, the following screen is where you
create and set up time interval:
Trunk: select trunk for incoming call to use. I select trunk2 I set up before.
Time Interval: determine the time when the incoming call rule works, I select timeinterval1 I set
up before.
Pattern: match the destination number, I use S which will match any destination number.
Destination: I select voicemenu1, so the call will be ruled to voice menu.
At last, please click on Update button, and click on Apply Changes button in up right corner of
the main page.

ATCOM IPPBX IP08 Specifications

General

Brand	ATCOM
Model	IPPBX IP08
Category	PBX
Language	English