www.atcom.cn 18
3.6.2 Create Analog User
Click on Create New User button, the following screen is where you create and set up user:
In the General component, you have to setup Extension, CallerID, Name, OutBound CallerID
parameters, and choose a dialplan for the phone. Here I set up user 6005, and select DialPlan1 for
the user.
I select Enable Voicemail for this User option, so the user has voicemail function.
In the Technology componet, you have to select the port in which the analog phone will be
plugged from the drop-down list of Analog Station. I select Enable Voicemail for this User
option, so the user have voicemail function.
In the Other Options component, I select Is Agent which will be listed in Call Queues as a
selectable member for call queue.
At last, please click on Update button, and click on Apply Changes button in up right corner of
the main page.