www.atcom.cn 17
3.6.1 Create SIP/IAX User
Click on Create New User button on the illustration above, the following screen is where you
create and set up user:
In General component, you have to set up Extension, CallerID, Name, OutBound CallerID
parameters, and choose a DialPlan for the extensions. Here I set up user 6003, and select
DialPlan1 for the user.
I select Enable Voicemail for this User option, so the user has voicemail function.
In the Technology component, you have to select SIP or IAX. Here I want to configure a SIP user,
so I select SIP. For the Codec Preference, only the first two types of code you set are available.
In the Other Options component, I select Is Agent which will be listed in Call Queues as a
selectable member for call queue.
At last, please click on Update button, and click on Apply Changes button in up right corner of
the main page.
To Next Page
Loading...
