ATCOM IPPBX IP08 Product Guide

www.atcom.cn 36
After inputting your new password, please click on Update button, then click on Apply Changes
button on the up right corner of the main page.
Factory Reset: it will help you to recover to the default factory settings. Click on Factory Reset
button, the following illustration will be presented below:
Please click on Reset to Defaults button to recover to default factory setting, then click on Apply
Changes button on the up right corner of the main page.
Reboot: you can click on Reboot buttonReboot Now button to reboot your system.
Advanced Options: in default, IP08 web page hides several advanced options in the vertical
menu on the left, if you need to use them, you have to display the options by
clicking on Show Advanced Options in the following illustration:
After click on Show Advanced Options in the illustration above, you can see the advanced
options in the vertical menu on the left of the main page like the following:

ATCOM IPPBX IP08 Specifications

General

Brand	ATCOM
Model	IPPBX IP08
Category	PBX
Language	English