- 78 -
Details of ECU triggered alarms can be monitored via
the ECU DM1 LIST menus.
In case of ECU AMBER LAMP or ECU PROTECT
LAMP:
Only possible when engine is running or if
Diagnostics Mode is active.
Access the ECU DM1 LIST menu via Alarm
View.
In case of ECU RED LAMP:
Do NOT acknowledge the ECU RED LAMP
alarm.
DM1 alarms are automatically copied into the
Alarm View, and can be read there.
For all ECU triggered alarms, the respective SPN
code is shown in the ECU DM1 LIST. A full list of
supported SPN codes is provided by the engine
manufacturer.
For following alarms, the Pc controller also shows
full text next to the SPN code:
• ECU - FUEL FILTER TEMPERATURE
• ECU - INTERCOOLER TEMPERATURE
• ECU - FUEL PRESSURE
• ECU - FUEL FILTER PRESSURE
• ECU - WATER IN FUEL
• ECU - OIL LEVEL
• ECU - OIL FILTER PRESSURE
• ECU - OIL PRESSURE
• ECU - TURBO BOOST PRESSURE
• ECU - TURBO OIL PRESSURE
• ECU - INTAKE MANIFOLD
TEMPERATURE
• ECU - AIR INLET PRESSURE
• ECU - COOLANT TEMPERATURE
• ECU - COOLANT LEVEL
• ECU - SUPPLY VOLTAGE
• ECU - AMBIENT AIR TEMPERATURE
• ECU - AIR INLET TEMPERATURE
• ECU - FUEL TEMPERATURE
• ECU - OIL TEMPERATURE
• ECU - ENGINE SPEED
• ECU - INJECTOR 1
• ECU - INJECTOR 2
• ECU - INJECTOR 3
• ECU - INJECTOR 4
• ECU - INJECTOR 5
• ECU - INJECTOR 6
• ECU - INJECTOR 7
• ECU - INJECTOR 8
• ECU - SOOT LOAD
7002 ECU COMMUNICATION Shutdown PC
7007 ECU RED LAMP Shutdown ECU
7008 ECU AMBER LAMP Warning ECU
7009 ECU PROTECT LAMP Warning ECU
7010 ECU ENGINE SPEED TOO LOW Shutdown PC
7020 ECU ENGINE SPEED ALARM 2 Shutdown PC
7030 ECU ENGINE COOLANT TEMP. ALARM Shutdown PC
7040 ECU ENGINE AIR INLET TEMP. ALARM 1 Controlled Stop PC
7050 ECU OIL PRESSURE LOW Warning PC
Alarm code Alarm text Fail class Trigger
To Next Page
Loading...
