The icon will turn red when touched to indicate activation of the button. The unit will then
power off. You can also do a forced power down by pressing the physical Power button on
the side of your NINJA V+ for four seconds.
For more information on the Power menu see the "Power Menu" on page 222 section.
Do not press and hold the power button in on the NINJA V+ while the unit is
off. This will place the device in to a Firmware recovery mode. If you acci-
dentally do this, simply turn the device off again or remove the power
source.
Take note to respect the air flow and do not obstruct the cooling vents of
the unit.
To Next Page
Loading...
