MONITORING MODE: Displays the monitoring display mode that has been selected.
Native, Rec709, HLG, PQ or the name of the 3D LUT selected. Touch to change settings.
CODEC (RECORDING FORMAT): Shows the recording format. Touch to change set-
tings.
METERS: (Audio Meters): Touching the audio meters will open the Audio Menu.
MEDIA : This shows the remaining recording time based on the chosen codec and remain-
ing capacity of the drive.
POWER: Touch to access Power Menu. A Battery icon will be displayed when a battery is
attached, with the current power level of the battery displayed visually. The icon flashes
red when power is running low, and will have an X over the battery icon when no battery
is attached. A Plug icon will be displayed when DC power is connected.
SETTINGS (yellow): Touch to access Monitoring Feature settings.
Touch MON again to return to previous screen.
The EDIT button works in a similar fashion to the Mon button, as it is not
possible to have Monitor and Edit active simultaneously.
To Next Page
Loading...
