A green tick on Source indicates the SHOGUN STUDIO 2 has locked signal on this input, a
red cross indicates a signal or lock issue with the attached device, double check your
cable and camera output settings.
CAMERA OUTPUT
For the best image processing results it is essential to match the SHOGUN STUDIO 2 set-
tings to the camera/input settings. Choose to use Log/HDR, camera type, Gamma,
Gamut or enable HDMI HDR auto if required. Your SHOGUN STUDIO 2 will recognise most
cameras when correctly attached via a compatible HDMI cable.
Log/HDR
Turn on to enable HDR image processing inside the SHOGUN STUDIO 2. Bring the control
of post into your shoot - record, preview and review using HDR.
Camera
Tap to scroll through to the manufacturer of the camera providing the input. Sony,
FujiFilm, Canon, Panasonic, ARRI, RED and JVC.
Gamma (Log Gamma Format)
For each manufacturer there may be a number of different Log curves available and you
can scroll through to the correct selection by tapping the Gamma icon.
Gamut
Select the Color Gamut of the input. This is not applicable to all cameras but again ensure
that this matches the input of the camera to ensure accurate monitoring.
To Next Page
Loading...
Need help?
General
