• None No embedded digital sources will be recorded in the program file. Only the ana-
logue inputs, if armed, will be recorded in the program file. Embedded digital sources will
only be recorded in the ISO files.
• Follow Switched Source
Audio will follow video, so when you switch to a different input, the source for audio will
come from the input you switched to.
• Choose 1,2,3,4
Allows you to select which channel’s audio to use as an embedded digital audio source
when switching between the sources.
Tap on the numbered inputs to select the source to use the audio from, and a white circle
will surround the red circle to confirm the source.
Inputs that have a red cross through the number do not have a source connected to
them, and inputs that are not armed for ISO recording will not be surrounded by a red
circle.
To Next Page
Loading...
Need help?
General
