Letter
- / +:
Use these icons to move forward or backwards through the letters of the alphabet. Doing
so will update the letter you selected with the arrows in the Unit Name setting.
Scene
Allows you to adjust the Scene number that will form part of the recorded clip filename: _
S001_S001_T001.MOV
- / +:
Use these icons to increase or decrease the numerical value for the Scene number up to
999. The value you select will be shown in the file name at the top of the screen during
recording,
Shot
Allows you to adjust the Shot number that will form part of the recorded clip filename: _
S001_S001_T001.MOV
- / +:
Use these icons to increase or decrease the numerical value for the Shot number.
Take
Takes that form part of the filename are automated:_S001_S001_T001.MOV
Format
Tap to cycle through the file naming format options:
l
Scene/shot/take: Allows you to accurately name planned shots as if you were
using a conventional slate.
l
Rolling scene/shot/take: Adds the ability to maintain continuous rolling file nam-
ing and take counts after re-formatting a drive.
l
Red/Arri: Selecting this option will allow your recordings to use the same name as
the files recorded in camera.
To Next Page
Loading...
