Atomos Shogun Studio 2 - Page 97

SmartControl
SmartControl is a versatile set of functions used to control the starting and stopping of
recording by automatic or external means. This section outlines the different methods to
start and stop recording.
SHOGUN STUDIO 2 2 Start and Stop record control can be triggered by the following
methods:
1. Home Page Touch Screen
2. HDMI Rolling Timecode trigger
3. HDMI Camera trigger
4. SDI Camera Trigger
5. Via LANC serial port
Some cameras perform optimally when triggering from the camera and not
the recorder.
Home page Touch Screen
SHOGUN STUDIO 2 2 Start and Stop record control can be triggered by pressing REC
(Record)
and STOP to end recording