ATX TranScend - Page 86

SNMP ENTERPRISE ATTRIBUTES
8-4 TranScend Chassis – Operation Manual
SYNTAX INTEGER {
noDownload(1),
downloadInProgress(2),
downloadChecksumError(3),
downloadSuccessful(4),
downloadFailed(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“Retrieve the current status of image download.”
::= { innoTransTranscendSystem 9 }
innoTransTranscendReboot OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
“Reboot target system.
Syntax: reboot now”
::= { innoTransTranscendSystem 10 }
innoTransTranscendHwVer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“The hardware version(s).”
::= { innoTransTranscendSystem 11 }
--
-- Equipment Attributes
--
-- ModuleTemp
-- Tx - Opt Power - dBm
-- - RF Level dB
-- - mode : MDC/AGC
-- Amp - PumpLaserPower
-- - Laser Output Power
innoTransTranscendModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF InnoTransTranscendModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION “Transcend module table”
::= { innoTransTranscendEquip 1 }
innoTransTranscendModuleEntry OBJECT-TYPE
SYNTAX InnoTransTranscendModuleEntry
MAX-ACCESS not-accessible
CHAPTER 8: