ATX TranScend - Page 87

SNMP ENTERPRISE ATTRIBUTES
TranScend Chassis – Operation Manual 8-5
STATUS current
DESCRIPTION “Entry in Parent table”
INDEX { innoTransTranscendModuleIndex }
::= { innoTransTranscendModuleTable 1 }
InnoTransTranscendModuleEntry::= SEQUENCE {
innoTransTranscendModuleIndex Integer32,
innoTransTranscendSlotState INTEGER,
innoTransTranscendModuleSwVer DisplayString,
innoTransTranscendModuleModel DisplayString,
innoTransTranscendModuleSerial DisplayString,
innoTransTranscendModuleTemp HeTenthCentigrade,
innoTransTranscendModuleHwVer DisplayString,
innoTransTranscendModuleDisplayName DisplayString
}
innoTransTranscendModuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
“The module index. The index of the rst module is 1.”
::= { innoTransTranscendModuleEntry 1 }
innoTransTranscendSlotState OBJECT-TYPE
SYNTAX INTEGER {
equipped(1),
unequipped(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“This object indicates the state of a slot. When a module is
plugged in a slot, it becomes equipped. When a module is
removed from a slot, it becomes unequipped.”
::= { innoTransTranscendModuleEntry 2 }
innoTransTranscendModuleSwVer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“The software version(s) of the module.”
::= { innoTransTranscendModuleEntry 3 }
innoTransTranscendModuleModel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
“The model name for the module.”
::= { innoTransTranscendModuleEntry 4 }
CHAPTER 8: