Audi A6 - Page 69

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Turn planet carrier „II“ and „III“ upside down.
– Fit planet carrier „II“ and „III“ -item 2- into annulus „III“
-item 1- with output shaft.
– Fit thrust washer -3- in planet carrier „II“ and „III“ -item 2-.
– Clip axial needle bearings -1- and -3- on at top -arrow- and
bottom of sun gear „III“ -item 2- according to marks made on
removal.
• The closed side of the axial needle bearings faces towards sun
gear „III“.
– Fit sun gear „III“ -item 2- in planet carrier „II“ and „III“ -item 1-.
• The chamfer -arrow- on sun gear „III“ faces upwards.
Audi A6 2005 ➤ , Audi A8 2003 ➤
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
3. Dismantling and assembling body „I“ 65