67
Shift
This allows the number of routing switches to be reduced by doubling the function of each switch.
With Shift unpressed routing is possible to tracks 1 through 8. With Shift pressed routing to tracks 9
through 16 is possible.
Solo in place
This is a method of previewing the signal in a channel and works by cutting all the signals feeding
the stereo bus other than the one(s) being solo’d. This is a destructive process and does aect the
stereo or mix output of the console.
Stereo Bus
This is usually the main bus in the console and provides the output to whatever stereo recording
device is in use. The stereo output is also used as the main monitor source allowing the output of
the multi-track to be heard and the balance of the individual tracks in the mix to be adjusted.
To Next Page
Loading...
