43
5
Turn the control dial to select “SYNC START” and press the control dial.
- Communication is in standby. Thereafter, see “Performing IR SYNC” (p.31).
• This setting can also be displayed by pressing and holding (for about 2 seconds) the control dial on the
main screen.
Setting the system-related functions (UTILITIES)
Set the auto-lock function to automatically disable operation if no
operation is performed for a certain period of time.
Edit channels for user groups (U1 to U6).
Set items to be displayed prominently in the center of the main screen.
Set the display brightness.
Set the movement when the control dial is turned.
Set the user access level.
Reset transmitter settings to user-specified settings or to factory defaults.
Display information such as the version of the transmitter.
Setting the auto lock (AUTO LOCK)
Set the auto-lock function to automatically disable operation if no operation is performed for a certain period of time.
1
From the menu screen, turn the control dial, select “UTILITIES” and then press the control dial.
2
Turn the control dial to select “AUTO LOCK” and press the control dial.
3
Turn the control dial to select “On” or “Off” and press the control dial.
The setting is complete.
Unlocking the auto lock
When auto lock is turned on, the button operation will be disabled if nothing is done on the main screen for about 10
seconds. To unlock, press and hold the control dial (about 2 seconds), select “Unlock” and press the control button.
To Next Page
Loading...
Need help?
General
