AudioCodes C455HD - Deactivating DSP Recording

CHAPTER7 Troubleshooting
C455HD | Users & Administrator's Manual
➢ To activate DSP recording using SSH protocol without the utility, type the following at the
shell prompt:
setprop ac.dr_voice_enable true
setprop ac.dr_ipaddr <ip_address>
setprop ac.dr_port 50000
DSP recording can be activated on the fly without requiring the network administrator
to reset the phone.
Deactivating DSP Recording
NetworkadministratorscandeactivateDSPrecordingusingAudioCodes'SSHprotocolbased
AndroidPhoneUtility.
➢ To deactivate DSP Recording:
1. Intheutility(seeAndroidPhoneUtilityonpage113formoreinformationaboutthe
application),clickStop DSP Record afteraperiodofrecording(seeActivatingDSP
RecordingonthepreviouspageforinformationonhowtostartDSPrecording).
2. ViewtheDSPrecordinginthePCfolderyouconfiguredwhenActivatingDSPRecordingon
thepreviouspage.
Network administrators can alternatively deactivate a DSP recording using SSH pro-
tocol without the Android Phone Utility, as shown next.
➢ To deactivate DSP recording using SSH protocol without the utility, type the following at
the shell prompt:
setprop ac.dr_voice_enable false
- 124 -