AudioCodes C470HD - Configuring Wi-Fi

CHAPTER3 Starting up
C470HD | Users & Administrator's Manual
Setting Description
networktrafficandtopology.
Debugging AllowstheAdminusertoperformdebuggingfortroubleshooting
purposes.AvailableafterlogginginasAdmin.
Logsettings
RemoteLogging(seeunderRemoteLogging(Syslog)onpage126for
moreinformation)
DiagnosticData(seeunderGettingDiagnosticsonpage129formore
information)
Resetconfiguration
RestartTeamsapp
Companyportallogin
DebugRecording(forMedia/DSPdebugging)(seeunderRemote
Logging(Syslog)onpage126formoreinformation)
Factorydatareset(theequivalentofrestoretodefaults;including
logoutanddevicereboot)
ScreenCapture.Bydefault,thissettingisenabled.Ifit'sdisabled,the
phonewon'tallowitsscreenstobecaptured.
Configuring Wi-Fi
[Applies  to devices whose PN indicates DBW ] Network administrators can configure Wi- Fi 
parametersforthephone.Theparametersareconcealedfromtheuser'sview.
● Users can enable|disable Wi-Fi using the phone screen; Wi-Fi cannot be
enabled|disabled using SSH command.
● The Wi-Fi connection is transparent to users; which frequency is used, 2.4 GHz
or 5 GHz, is made for users by the phone; users cannot disable one or the other.
NetworkadministratorscanconfigureWi-Fisettingsinthephonescreen.
- 30 -