AudioCodes C470HD - Power Saving; Enabling Voicemail Support on CAP Users

CHAPTER4 Teams Application
C470HD | Users & Administrator's Manual
Power Saving
Thephone’sMessageWaitingIndicator(MWI)shutsdownduringoffhours.Duringoffhours,
thedevice’sMWI/PresenceLEDisswitchedoffandtheLCDblacksout.
➢ To enable this feature:
■ Inthephonescreen,navigatetoDevice Settings>Enable power saving.
● By default, the feature is disabled.
● The feature is based on off work hours and sleep timeout.
TheConfigurationFileparametersbelowalsosupportthefeature.Theycanbe
synchronizedwiththesettingsinthephonescreen.
● general/power_saving(Usedtoenableordisablepowersaving)(Default:0)
● office_hours/end
● office_hours/start
Enabling Voicemail Support on CAP Users
Theinstructionshereshowhowtoenablevoicemailoncommonareaphoneusers.Voicemail
canbeenabledfromthephoneorfromtheTAC.TheAdvanced calling settingmustbe
enabled.
➢ To enable voicemail from the phone:
1. Inthephonescreen,selecttheavatar.
2. NavigatetoDevice Settings>Device administration.
3. Enterthepassword1234.
4. Access'TeamsAdminSettings'andselectCalling.
5. EnableAdvanced calling.
6. RestarttheTeamsappasprompted.
- 63 -