Installation and Configuration Manual 6. Configuring Survivable Branch Appliance
SBA for Microsoft Lync 119 December 2010
8. Select the Front End Pool to be used with this SBA.
Figure 6-10: Front End Pool
9. Select the Edge Pool to be used with this SBA (optional).
Figure 6-11: Edge Pool
10. Do the following:
• Click Gateway FQDN op IP Address, and then type the Gateway FQDN or IP to be
used by the Mediation Server component of the SBA.
• Click Listening port for IP/PSTN Gateway, and type the Gateway listening port.
• Select the SIP Transport Protocol.
To Next Page
Loading...
