Installation and Configuration Manual 6. Configuring Survivable Branch Appliance
SBA for Microsoft Lync 153 December 2010
6.2.2.11 Start MCS Services
This menu option enables you to start a Microsoft Communications Server component that runs
as a Windows service.
¾ To start MCS Services:
1. On the Setup menu, click Start MCS Services; the following screen appears.
Figure 6-69: Start MCS Services
2. Click Apply to start the services as per the MCS configuration settings.
3. A green check mark appears by the completed menu item.
Figure 6-70: Start MCS Services - Completion
To Next Page
Loading...
