Survivable Branch Appliance
AudioCodes Enhanced Media Gateway 132 Document #: LTRT-18206
6.2.2.4 Set Date and Time
This menu option resets the date and time zone.
¾ To set the date and time:
1. On the Setup menu, select the Set Date and Time link; the following screen appears:
Figure 6-32: Date & Time Page
2. Select the Date tab and set the date and new time.
3. Click Apply; an “Operation Completed Successfully” message appears on the bottom of
the screen.
4. Click Time Zone tab; the following screen appears.
Figure 6-33: Set Time Zone Page
5. Open the drop-down list and select the appropriate Time Zone.
6. Click Apply; the following screen appears.
To Next Page
Loading...
