AudioCodes Mediant E-SBC 4. Configuring the Device
BroadCloud SIP Trunk 23 AudioCodes Mediant E-SBC
6. Select the upgrade option System Reset Upgrade
7. Press the Next button to navigate through the Wizard.
8. In the Wizard's page for loading an ini file:
• Deselect the 'Use existing configuration' option
• Load a new ini file: In the 'Load an ini file...' field, click Browse, and then
navigate to where the ini file is located on your computer. Select the file, and then
click Load File; the device loads the ini file.
Figure 4-4: Software Upgrade Wizard – Load INI File
9. Press the Next button to navigate to the Call Progress Tones (CPT) Wizard page.
10. In the Wizard's page for loading the Call Progress Tones (CPT) file, click Browse, and
then navigate to where the call_progress_xxxxx.dat (‘xxxxx’ being the country name)
file is located on your computer. Select it and click Load File; the device loads the
tones file.
Figure 4-5: Software Upgrade Wizard – Loading the CPT File
11. Click Next until the last Wizard page appears (the FINISH button is highlighted in
the left pane):
To Next Page
Loading...
