RXV81 MTR on Android Video Collaboration Bar
User's & Administrator's Manual 26 Document #: LTRT-18259
• For example, if a preset is configured to zoom in and focus on the whiteboard in a room,
users in a video call/meeting can switch to it and later switch back to the full room preset
or any other predefined preset. It’s recommended to have a few presets configured for
locations frequently zoomed in and focused on:
Full room view to capture all participants and action in a meeting room
Presenter or single user / desk view to focus on a single user in the room, usually
the presenter
Whiteboard view if there’s a whiteboard in the room
Sunlight or dark modes if direct sunlight enters the room at specific times of the
day/year
Camera settings can be changed during a meeting without turning off the video to remote parties.
➢ To add a camera preset when in idle mode:
1. Long-press the camera button to access Camera settings.
Figure 3-3: Camera settings
2. Navigate to and select Views to create a view; you can create up to three views.
3. Navigate to and select PTZ to define pan, tilt, and zoom settings for each view.
To Next Page
Loading...
