RXV81 MTR on Android Video Collaboration Bar
User's & Administrator's Manual 50 Document #: LTRT-18259
4.1.4.1 Configuring Camera Frequency
The Camera frequency (under Device settings) must be set per the power supply as follows:
◼ 110V – 60Hz
◼ 220V – 50Hz
4.1.5 Auto Framing
An Auto-Framing option is available under Camera Settings.
◼ To enable Auto-Framing on RXV81 paired with RX-PAD, use the camera hard key to access
the Camera Settings page.
◼ For RXV81 paired with the Remote Controller unit (RCU), long-press the RCU’s camera
button to access the Camera Settings page.
Note:
• Admin users can create a permanent camera settings preset including enable /
disable of Auto Framing.
• End users can either select a preconfigured preset which includes enable / disable of
Auto Framing or create a temporary preset during a meeting (which will be deleted at
the end of the meeting) and can enable / disable Auto Framing.
To Next Page
Loading...
