RXV81 MTR on Android Video Collaboration Bar
User's & Administrator's Manual 68 Document #: LTRT-18259
2. Navigate to and select Voice record to enable the feature.
3. Navigate to and select Remote IP address to input the IP address of the device whose traffic
you want to record.
4. Navigate to and select Remote port and input it (Default: 5000).
5. Start Wireshark on your PC to capture audio traffic.
4.1.11.10 Erase all data (factory reset)
This option is the equivalent of restore to defaults, including logout and device reboot.
➢ To erase all data (factory reset):
1. Navigate to and select Erase all data (factory reset).
2. Navigate to and select RESET PHONE.
4.1.11.11 Screen Capture
By default, this setting is enabled. If disabled, the phone won't allow its screens to be captured.
To Next Page
Loading...
