ADVANCED MANUAL / Bit One /
14
5. Check if the Bit One Setup CD is inside the CD-ROM drive
Windows XP: select “Install software automatically” then click on “Next”;
Windows Vista: click on “Next”;
Windows 7: click the “Browse“ button to locate the setup CD, select the CD “Bit One V_15”, click on “OK”, then
on “Next”;
6. The following window regarding the driver certification warning will show up.
Windows XP: click on “Continue Anyway”;
Windows Vista: click on “Install this driver software anyway”;
Windows 7: click on “Install this driver software anyway”;
7. The system will install the ACLink interface drivers:
Windows 7
Windows 7
Windows 7
Windows XP
Windows XP
Windows XP
Windows Vista
Windows Vista
Windows Vista
6