ADVANCED MANUAL / Bit One /
30
The following pages describe the Bit One features that can be managed through the software.
9. HOW TO SET UP THE BIT ONE WITH THE PC
WARNING:
We recommend that you do not modify the settings of your Bit One to explore its different features.
Take your time to get familiar with the possibilities this software offers.
The settings you can set through the Bit One have immediate effect on the signal and, if they have not been made
with proper attention, they may result in damage to the speakers in your system.
If you decide to leave the amplifiers connected to the Bit One, remember to perform the adjustments
keeping the general volume at a level that does not damage the speakers in your system.
If it is the first time that you connect your Bit One to a PC, we recommend that you
FINALIZE the Bit One, to avoid losing the data stored when performing the auto-setup
process
(see section 9.2.3).
The Bit One now has proper basic setup. In the following chapters the features allowing
acoustic tuning of the system will be detailed out.
Software Start Up
The software transfers to the processor main memory the settings
selected during the guided procedure.
Once this operation is completed, a message confirming that the
update has been done will be displayed.
Press
OK.
9.1 FEATURES
1
2
12
8
3
5
9
4
11
6
7
10
9
To Next Page
Loading...
