Audison bit one User Manual

ADVANCED MANUAL / Bit One /
9
1. SPEAKER IN Hi-Level STEREO Front + Rear
2. SPEAKER IN Hi-Level MULTICHANNEL
3. CONNECTION WITH HANDS-FREE PHONE KIT
(see section 5.2.5)
(see section 5.2.5)
Signal: input compatible with the hands-free kit headphones or
speaker output. Sensitivity adjustable via the Bit One PC
software from 0.6V to 10V RMS.
Mute: Bit One on. It gives priority to the phone conversation,
allowing to resume the audio reproduction when the
phone call is finished.
Mute: Bit One off. It turns the Bit One on. When a phone call
is received, the phone ringing tone is audible after around
9 seconds. Once the phone call is finished, the Bit One
turns off.
5.5 HIGH-LEVEL INPUT SIGNALS
Bit One.1
To deactivate the ART
function on Ch1 take out
the Jumper as indicated in
the picture.
MAX:
8 amplified
channels
Original amplified source
CH1: Auto Turn On System (ART)
CH1: Auto Turn On System (ART)
Front Rear
Amplified Source
Signal
mute
BIT ONE
Left Side
5

Audison bit one Specifications

General

Number of Channels	8
Output Channels	8
Crossover	Yes
Time Alignment	Yes
THD	0.005 %
Type	Digital Signal Processor
DSP Resolution	32-bit
Crossover Slope	6/12/18/24 dB/octave