ADVANCED MANUAL / Bit One /
29
6. De-equalization
Through a real-time progress bar and specific messages
the software shows how the procedure is being executed.
Once the procedure is completed, the window will show the
message “Press Next to Continue”.
Press BACK to go back to the previous step.
Press NEXT to go ahead with the set-up procedure.
Press CANCEL to exit the program.
7. How to select the speakers of your system
From this point on the procedure is same as the one of the low-level inputs section.
(see section 8.4.4)
Screen
image
sequence
6
8
To Next Page
Loading...
