ADVANCED MANUAL / Bit One /
16
13. The system will install the ACLink drivers:
12. The following window regarding the driver certification warning will show up.
Windows XP: click on “Continue Anyway”;
Windows Vista: click on “Install this driver software anyway”;
Windows 7: click on “Install this driver software anyway”;
14. If the procedure was successfully completed, the system will notify you that the driver installation has been completed.
Windows XP: click on “Finish”;
Windows Vista: click on “Close”;
Windows 7: click on “Close”;
15. The installation of the Bit One software and driver is now completed (see section 8).
Windows 7
Windows 7
Windows 7
Windows XP
Windows XP
Windows XP
Windows Vista
Windows Vista
Windows Vista
6