ADVANCED MANUAL / Bit One /
33
3
Dynamic Equalization: if enabled, this feature provides
the ability to improve the sound reproduction by actively
acting on the variations of the frequency response when
modifying the volume
(see section 9.13).
4
Dynamic Equalization ON/OFF: it provides the ability to
enable or disabile the Dynamic Equalization
(see section 9.13).
5
Com Setup: it provides the ability to view the list of the
communication ports available in your PC and to manually
specify the communication port that is connected to the
Bit One.
6
Working Mode: the software has two working modes
available: Standard and Expert, acting on the crossover
filter section.
The Standard mode features some restrictions easing in
the use of the software
(see section 9.6).
The Expert mode does not feature any restrictions in the
functions to use the software
(see section 9.6).
2
External Source: it provides the ability to enable or
disable auxiliary sources that have not been or have been
selected while performing the setup
(see section 8.3.2), without
repeating the auto-setup operation
(see section 9.9.2).
We suggest to try and use the software in Expert mode;
if it is too difficult, change to Standard mode.
WARNING: when you change from one mode to the other,
the crossover filters parameters are restored back to the
default ones (Default).
9
To Next Page
Loading...
