AUMA SG 05.1 User Manual

4.
Press .
➥
Display indicates:
SETTINGS M10
SET LIMIT SWITCHES
SEATING MODE
TORQUE
5.
Select MODBUS 1 (M1F): Press several times.
➥
Display indicates:
SETTINGS M1B
MONITOR TRIGGERS
POSITIONER ENABLED
MODBUS 1
6.
Press .
➥
Display indicates:
MODBUS 1 M1F0
VIEW
EDIT
7. View or edit?
Check settings (view): continue with 8.
Change settings: continue with 11.
Check settings (view):
8.
Press .
➥
Display indicates:
MODBUS 1 M1F01
BAUDRATE
PARITY
CONNECT-CONTROL TIME
9.
Use to select BAUDRATE, PARITY or SLAVEADDRESS and confirm se-
lection with .
➥
Display shows the selected value. Example SLAVEADDRESS:
VIEW
SLAVEADDRESS
1
C:ESC
10.
Return to the VIEW/EDIT menu:
→
Press C twice.
51
SG 05.1 – SG 12.1/SGR 05.1 – SGR 12.1 Control unit: electronic (MWG)
AC 01.1 Non-Intrusive Modbus RTU Commissioning (basic settings)

AUMA SG 05.1 Specifications

General

Brand	AUMA
Model	SG 05.1
Category	Controller
Language	English