AUMA SG 05.1 User Manual

Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Preserve operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Purpose of the document:
This document contains information for installation, commissioning, operation and maintenance staff. It is intended
to support device installation and commissioning.
Reference documents:
●
Manual (Operation and setting) AUMATIC AC 01.1/ACExC 01.1 Modbus
●
Manual (Device integration Fieldbus) AUMATIC AC 01.1/ACExC 01.1 Modbus
Reference documents can be downloaded from the Internet (www.auma.com) or ordered directly from AUMA
(refer to <Addresses>).
Table of contents Page
51. Safety instructions.................................................................................................................
51.1. Basic information on safety
51.2. Range of application
61.3. Applications in Ex zone 22 (option)
61.4. Warnings and notes
71.5. References and symbols
82. Identification...........................................................................................................................
82.1. Name plate
92.2. Short description
103. Transport, storage and packaging........................................................................................
103.1. Transport
103.2. Storage
103.3. Packaging
114. Assembly................................................................................................................................
114.1. Mounting position
114.2. Ball handle: fit to handwheel
114.3. Part-turn actuator to valve: mount
124.3.1 Coupling
134.4. Mounting positions of local controls
134.4.1 Mounting positions: modify
155. Electrical connection.............................................................................................................
155.1. Basic information
175.2. Connection with AUMA plug/socket connector
175.2.1 Terminal compartment: open
185.2.2 Cable connection
195.2.3 Terminal compartment: close
195.2.4 Bus terminal compartment: open
205.2.5 Bus cables: connect
235.2.6 Bus terminal compartment: close
235.3. Accessories for electrical connection
235.3.1 Controls mounted to wall bracket
2
SG 05.1 – SG 12.1/SGR 05.1 – SGR 12.1 Control unit: electronic (MWG)
Table of contents AC 01.1 Non-Intrusive Modbus RTU

AUMA SG 05.1 Specifications

General

Brand	AUMA
Model	SG 05.1
Category	Controller
Language	English