Automation Direct Stellar SR55 Series User Manual

Page 6–2 Stellar
®
SR55 Series Soft Starter User Manual – 1st Ed, Rev F – 09/18/2019
Chapter 6: Accessories
opTIoNAl AccessoRIes
SR55 Optional Accessories
Part Number Description
For
SR555
Models
SR55-CM-ENETIP
EtherNet/IP communication module, optional, for Stellar SR55 series soft starters, dual
RJ45 communication ports, complete EtherNet/IP adapter, TCP/IP socket interface, CIP
parameter object support, explicit and implicit messaging (2 input words, 2 output
words), transformer isolated Ethernet interface, 10/100 Mbps full duplex.
all
SR55-CM-MODTCP
Modbus TCP communication module, optional, for Stellar SR55 series soft starters, dual
RJ45 communication ports, complete Modbus TCP server, up to 256 bytes of I/O data
in each direction, transformer isolated interface, 100 Mbps full duplex, TCP/IP socket
interface, capable of supporting 4 simultaneous (master) connections.
all
SR55-FG-1
Finger guards, optional, for size 1 Stellar SR55 series soft starter power terminals.
Provides IP20 protection rating. Package of 2.
-017
thru
-096
SR55-FG-2
Finger guards, optional, for size 2 Stellar SR55 series soft starter power terminals,
Provides IP20 protection rating. Package of 2.
-124
thru
-180
SR55-KPD-REM
Touchscreen, optional remote, for Stellar SR55 series soft starters. Used to remotely
monitor, configure, and control SR55 series units without opening enclosures. Rated
for IP55 enclosures, no external power wiring required. Includes 3m (9.8 ft.) Cat5e
cable and SR55-RJ45-RJ12 adapter.
all
SR55-SPLT
Serial Modbus communication splitter, optional, for Stellar SR55 series soft starters.
Used for creating a Modbus network with multiple SR55 series soft starters. Uses 3
serial RJ45 connectors for upstream/downstream connectivity and for connection to
the starter. Includes 3m (9.8 ft.) Cat5e cable and SR55-RJ45-RJ12 adapter.
all
SR55-RJ45-RJ12
RJ45 female to RJ12 male adapter, optional, for Stellar SR55 series soft starters. all
finger guards
sr55-fg-1 sr55-fg-2
Install these optional finger guards on the power-circuit line and load side power terminals to
provide IP20 protection for soft starter sizes SR55-180 and below (frame sizes 1 and 2).
The addition of optional finger guards to size 1 and size 2 SR55 soft starters adds
approximately 14mm [0.5in] to the vertical dimension, but does NOT change the clearance
distance.

Automation Direct Stellar SR55 Series Specifications

General

Brand	Automation Direct
Model	Stellar SR55 Series
Category	Controller
Language	English