Autonics Digipower 2000 - User Manual

DPU(1-phase) Series
Digital Thyristor Unit
USER MANUAL
The invisible hand for more convenient world
sensors & controllers
Thank you very much for selecting Autonics products.
For your Safety, please read the following before using.
DPU Series

Autonics Digipower 2000 Specifications

General

Output Type	Relay, Current
Output Range	Current: 4~20mA
Control Method	ON/OFF control
Power supply	100-240V AC 50/60Hz
Operating Temperature	0~50°C (32~122°F)

Summary

Safety Precautions

Product Introduction

Specifications

Technical Specifications

Lists detailed electrical, environmental, and physical characteristics of the DPU series.

Connections

Installation and Initial Operation

Parameters

Parameter Setting and Functions

Control Input

Functions

Explains various operational functions like control methods, soft start, and limits.

Alarm

Details different alarm types, their causes, display, and clearing methods.

Maintenance

Modbus Mapping Table

Read Holding Registers (Function code 3)

Details the request, response, and error structure for reading holding registers.

Read Input Registers (Function code 4)

Details the request, response, and error structure for reading input registers.

Write Single Register (Function code 6)

Write Multiple Registers (Function code 16)

Address Mapping Table