Autonics Digipower 2000 - Product Introduction

1.Productintroduction
11
©CopyrightReservedAutonicsCo.,Ltd.
1.Productintroduction
1.1 Features
● Accurate feedback control (static current, static voltage, static power) by RMS measurement
● Phase control and zero-crossing cycle control (xed/variable cycle) method for various load
control
● Remote monitoring and remote control
● Supports Modbus RTU protocol by RS485 communication
● Fast response speed by high-speed CPU
● Built-in customizable 6 digital inputs (DI)
● Basic variable alarm outputs; current error, heater disconnection (heater some disconnection
detection), etc.
● Supports multi input of control input signal (current, voltage, potentionmeter, etc)
● Enables to install control part separately
● Applicable load: all loads such as super kanthal, platinum, molybdenum, carbon, halogen lamp,
chrome, nickel, etc.