Autonics Digipower 2000 User Manual

8.Maintenance
47
©CopyrightReservedAutonicsCo.,Ltd.
8.Maintenance
8.1 Fuse
To prevent accident, replace a fuse every two years.
Turn OFF the power and remove the power to remove the fuse which is in the product.
Fuse position by each model
BtypeAtype
DtypeCtype
Fuse
Fuse
Fuse
Fuse
● Use the designated Fuse.
● After changing the fuse, you must check the fuse is installed correctly.

Autonics Digipower 2000 Specifications

General

Brand	Autonics
Model	Digipower 2000
Category	Controller
Language	English