How to fix program grammar error on Autonics LP-S070 Touch Panel?
If you encounter a program grammar error, indicated by F0030 or F0034 being ON, correct the program grammar in SmartStudio and re-download the program to your Autonics Touch Panel.
What to do if there is an I/O setting error on Autonics Touch Panel?
If you are experiencing an I/O setting error on your Autonics Touch Panel, indicated by F0030 and F0039 being ON, check the extension module I/O settings.
Essential safety guidelines for product operation, installation, and usage.
Defines the Logic Panel (LP) as an integrated HMI and PLC device.
Covers general, performance, and basic specifications of the LP-S070.
Step-by-step guide for mounting the LP-S070 unit into a panel.
Guidelines for power, ground, input, and output wiring connections.
Details pre-power checks and the operational sequence for startup.
Lists common errors and provides methods for troubleshooting.
General| Display Size | 7 inch |
|---|---|
| Display Type | TFT LCD |
| Touch Type | Analog Resistive |
| Contrast Ratio | 500:1 |
| Backlight Life | 50, 000 hours |
| Resolution | 800 x 480 |
| Communication Interface | RS-232, RS-485, USB |
| Power Supply | 24V DC |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20 to 60 °C |
| Power Consumption | 10W max |
| Weight | 600g |
To Next Page