6 System Screen
© Copyright Reserved Autonics Co., Ltd. 125
6.7 Diagnostics
6.7.1 System initialization
This menu is for initializing user data and setting values of LP-S070.
Be sure that once deleted data cannot recover.
Especially for saving alarm history contents, by GP Editor upload alarm history and alarm
frequency with checking ‘Alarm History (Alarmhistory.txt)’ and ‘Alarm Frequency
(Alarmfrequency.txt)’ in tag box of ‘Monitor Data Upload’ dialog box from [Communication]–
[Upload] menu to save txt files. If LP-S070 and serial printer is connected, you can print alarm
history in [Functionality]–[Print Out] of system setting menu.
①
Select ‘GP DATA initialization’ and touch ‘OK’. Data, part, comment and common
settings are initialized. After completing data initialization, ‘USER SCREEN IS NOT
FOUND’ message appears.
To Next Page
Loading...