1 Overview
© Copyright Reserved Autonics Co., Ltd. 19
1.5 Communication
Depending on PLC model type, connections for PLC are different, therefore refer to ‘G P, L P
user manual for communication’.
Every device such as PLC is able to connect any RS232C or RS422 port.
CH1, CH2 is designates in GP Editor.
(1) Connection of 1 PLC
Connect PLC to a port and one of PC, printer, barcode reader to the other port.
(2) Connection of CH1 and CH2
Connect PLC to LP-S070 ports.
It is able to connect even if CH and CH2 are not same type PLC, LP can relay data
exchange between CH1 and CH2 according to configuration.
To Next Page
Loading...