Autonics LP-S070 - Input Wiring

2 Installation
28 © Copyright Reserved Autonics Co., Ltd.
2.2.2 Input wiring
Consider required voltage for wiring I/O cable, and use optimal diameter cables.
(1) Input terminal wiring
Inner input module of LP-S070 series is NPN open collector (source type) type.
LP-S070-T9D6(7)-C5R input connection
diagram
LP-S070-T9D6(7)-C5T input
connection diagram
 Divide I/O cable by color. Do not wire I/O cables to same duct.
 Keep min.100mm distance from power line and other high voltage line to wire.