Autonics LP-S070 - Communication Interface

1 Overview
© Copyright Reserved Autonics Co., Ltd. 21
1.5.1 Communication interface
1.5.1.1 Serial interface
(1) Serial port
Port
Pin
Port
Pin
1 Non-used 1 TXD+
2 RXD 2 RXD+
3 TXD 3 Non-used
4 DTR 4 Non-used
5 SG 5 SG
6 DSR 6 TXD-
7 Non-used 7 RXD-
8 Non-used 8 Non-used
9 Non-used 9 Non-used
(2) Serial port setting
Designate the desired settings for below items at [Environment] - [Serial Communication]
Interface RS232/RS422
Baud rate 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200bps
Data length 7, 8 Bit
Stop bit 1, 2 Bit
Parity ODD, EVEN
Flow control XON/XOFF, DSR/DTR, NONE
1.5.1.2 USB interface
USB Device
Pin
USB HOST
Pin
1 5V 1 5V
2 D- 2 D-
3 D+ 3 D+
4 4 GND
5 GND
You can download designed data of GP
Editor and PLC program of SmartStudio by
connecting USB Device PC.
You can update firmware by USB memory stick and
install LP project file and SmartStudio project file.