Autonics LP-S070 - Battery Remaining

6 System Screen
126 © Copyright Reserved Autonics Co., Ltd.
No.
Function and operation
②
Select ‘LP DATA initialization’ and touch ‘OK’. Ladder program, parameter, and device
data are initialized.
6.7.2 Battery remaining
You can check battery remaining from [Diagnostics]-[Battery remainaing] of system setting menu
in LP-S070. Please replace battery if battery remaining is below 5%.
No.
Function and operation
①
Displays battery remaining with 0 to 100% as numerical percentage.
②
Displays battery remaining with bar graph
Please contact our service center to replace battery.
It may cause an explosion or a fire when using improper battery.